Pre-order the DJI Phantom 4 RTK today

Drone-based RTK for holds an enormous amount of promise for land surveyors, but has been held back by extremely expensive, complicated, and unreliable technology. The release of the Phantom 4 RTK, DJI has changed that.

Our hundreds of land surveyor clients have seen the incredible time savings of an effective drone survey program and our photogrammetry & CAD linework service. With the Phantom 4 RTK, these savings increase even more. On-board high-accuracy GPS means that fewer Aerial Ground Control Targets are needed on any project, which means faster drone surveys.

Interested? Complete the form below to pre-order your Phantom 4 RTK today.

 

Buy through Aerotas to profit fast

No drone is a magic bullet, and on-board drone RTK is a complex technology. We set up and configure your new Phantom 4 RTK to ensure it works flawlessly for the photogrammetry and survey linework you need. We do the grunt-work so you don’t have to.

 
 Phantom 4 RTK for surveyors

Raw GPS data from the drone must be processed into the coordinates the photos were taken in, via RTK or PPK corrections on satellite data. Then the coordinate system of the airborne RTK must be reconciled with the ground-shots taken on the survey project — a messy process. This is where we see the most issues with RTK systems. The Phantom 4 RTK is no exception, and its OcuSync Transmission System, TimeSync System, and camera need to be configured specially to work on your projects. Aerotas does this for you, so when you get your Phantom 4 RTK, it works right out of the box.

We’re taking pre-orders today for delivery in November

Choose between:

  1. Fully configured Phantom 4 RTK kit, including all the batteries and supplemental equipment you need

  2. Our complete drone program setup, including Part 107 training, on-site Flight Operations Training by one of our experienced pilots, and insurance

Submit the form to the right and one of our Product Specialists will contact you with pre-order information.

Read more about the Phantom 4 RTK

 
 

Get Preorder information by completing the form

Phone number *
Phone number
Select which best describes you
 

Fly Phantom 4 RTK, Get Linework

A drone is only as good as the survey it gets you. That’s why Aerotas pioneered our drone data processing service.

Designed specifically for land surveyors, our photogrammetry + CAD linework service gets you the contours, breaklines, surface, and 2D features you need — fast, accurate, and inexpensive. With a human in the loop on every project, we ensure that your drone survey data is as high-quality as possible. ASPRS Certified technicians manage every photogrammetry project, and our team of CAD linework technicians get you exactly the features your project needs.

Our Flight Operations team is also here to help you get the most from your Phantom 4 RTK projects. Experts in drone survey project planning, they are ready to guide you through everything from FAA Airspace Authorizations, to where to set the (few!) Ground Control Targets you need, through how to request and approve quotes for linework.