Eric Seger
DJI Announces the Zenmuse L2

On 10/10, DJI announced the Zenmuse L2. We believe the new L2 will offer exceptional technical improvements over both the L1 and the current mid-tier sensor market. We’re excited to share what we know about the delivery timeline, and how we view the technical specs.

DJI Announces the Zenmuse L2
Drone Hardware, Drone Data Processing
Guest User
DJI Zenmuse L1 Lidar Review

DJI’s long-anticipated L1 sensor is finally here, and we’ve been doing dozens of test flights and spending hundreds of hours flying and analyzing data to create a real-world, field-tested review of the newest DJI L1 sensor.

DJI Zenmuse L1 Lidar Review
Drone Hardware
Guest User
Which lenses work with the DJI P1?

DJI states that “The P1 supports 24mm, 35mm, and 50mm lenses with industry-specific DL mounts. Only use lenses engraved with the "DJI Enterprise" logo to produce survey-grade accurate results.” But, there is more to the story.

Which lenses work with the DJI P1?
Drone Hardware, Drone Surveying
Guest User
Do you need the DJI D-RTK 2 Base Station?

There are numerous ways to process GNSS data from the DJI M300 RTK and the Phantom 4 RTK. This article will discuss the five most common methods for processing data from DJI RTK drones and weigh their strengths and weaknesses.

Read the article to get answers to these common questions:

  • Can I use my Trimble, Leica, or Topcon base with the Phantom 4 RTK?

  • Is it possible to use my NTRIP correction service without a base station?

  • Will the DJI D-RTK 2 work as a standalone base or rover?

Do you need the DJI D-RTK 2 Base Station?
Drone Hardware, Drone Surveying
Guest User
Is the Mavic 2 Enterprise Advanced a good drone ...

Is the Mavic 2 Enterprise Advanced a good drone for Land Surveying?

Is the Mavic 2 Enterprise Advanced a good drone for Land Surveying?

Drone Hardware

,

Spring Cleaning: Keeping your drone airworthy

,
Spring Cleaning: Keeping your drone airworthy

In order to maintain reliability in our UAS, we need to inspect and update our equipment on a regular basis. After a long winter, or prolonged bad weather, or even just lack of suitable jobs for the drone, it is important to thoroughly run through all of your system and visual checks before firing up the drone for a client mission.